Product Description
Temporary Fencing Melbourne 2.1mx2.5m OD30mm x 1.40mm wire 2.5mm mesh 60mmx150mm
This round tube frame temporary fence is very popular in Australia. It can quickly and easily be installed without the need to disturb the surface area by digging holes or laying foundations. Our experts can assist you to define how much fence, the best placement and the options that will be required to achieve your goal. This type of temporary fence which is made of HT-FENCE is fully meet Australian markets’ requirements. When used in construction with our Plastic/Concrete Fence Feet, Steel Clamps and Stays, it creates a Complete Temporary Fence System that is very stable, versatile and cost-effective.
|
Panel size(mm)
|
1800(H)x2100(L),1800(H)x2400(L),2100(H)x2400(L)
|
|
Opening (mm)
|
50x100/50x150/50x200/60*150/75x150
|
|
Wire Dia(mm)
|
3/3.5/4 mm
|
|
Panel Frame(mm)
|
Thickness:1.2,1.5,1.6,1.8,2.0
|
|
Fence stay
|
1500mm,1800mm high
|
|
Fence feet
|
Plastic feet600*220*150 or steel feet
|
|
Fence Clamp
|
Pitch 100 or 75
|
|
Finishing of fence
|
hot-dipped galvanized then paint, galvanized then Powder coated
|
|
Note: The fence can be customized according to your required if an above specification is not satisfied with you.
|
Temporary fencing plastic based:
Made of plastic which is made from polypropylene.
Color:orange,red,blue,yellow for your choice.
Hole size available:32mm,40mm,60mm.
Size:560x245x130mm,600x220x150mm,600x220x100mm.
Temporary fencing clamp
A good quality temporary fencing clamp that will hold the pipe in place, even under extreme pressure
These clamps are hot dip galvanised and meet Australia standard.
Temporary fencing brace
Stay's OD is the same as frame OD.
Generally speaking, 3-5 panels need one brace, and one brace equipped with one clamp and 1-3 based.
Temporary fence features:
It can quickly and easily be installed without the need to disturb the surface area by digging holes
or laying foundations.
• Anti-climb mesh infill
• 360°weld between the vertical & horizontal pipe
• Horizontal pipe ends crimped for increased strength.
• Above Industry Benchmark in thickness of galvanising.
The manufacturing process uses hand welding for optimum strength with an average of over 70 microns
hot dipped galvanised finish. We use the highest quality material specification, incorporating.
